PIX 515 DMZ is very slow from certain ip addresses.

[JCurrier]

Network info:

PIX 515 running 6.3(3)

pix address: 10.0.10.60/255.0.0.0
dmz address: 172.16.31.2/255.255.255.0

webserver: 172.16.31.50/255.255.255.0

dhcp range: 10.0.14.1-10.0.15.254/255.0.0.0

The problem:
When systems try to access the webserver, it loads very slow and most often doesn't completley load. However, from 10.0.10.x addresses it works fine. I have checked over the settings repeatedly and I can't find anything that looks out of place. I need users in the dhcp range to be able to use this server.

Here is some of the relevant info from the pix config:

ip address:
ip address outside 12.105.91.229 255.255.255.240
ip address inside 10.0.10.60 255.0.0.0

nat:
nat (inside) 1 10.0.0.0 255.0.0.0 0 0
nat (dmz) 1 172.16.31.0 255.255.255.0 0 0


Any ideas as to why this is happening?

Thanks in advance...

--Josh.

 

[JCurrier]

Nevermind, it was a WebSense issue.