PIX 515 Config

[Mober]

I have been trying to configure a PIX 515 firewall for awhile now with no luck maybe someone can help me here. My PIX has an outside interface of 192.168.5.254, 255.255.255.0 , an inside interface address of 10.1.1.1, 255.255.0.0, and the next hop in the network is a router at 192.168.5.1, 255.255.255.0. Also my firewall will assign global address from 192.168.5.100-248 once traffic from my network leaves the firewall. If anyone can help my get traffic out of the firewall I'd be great full thanks.

 

[North323]

can you post a scrubbed config? be nice to see your routes.

 

[Mober]

Have some problem posting but my routes are as follows

outside 0.0.0.0 0.0.0.0 192.168.5.1 1 other static
inside 10.1.0.0 255.255.0.0 10.1.1.1 1 connect static
outside 192.168.5.0 255.255.255.0 192.168.5.254 1 connect static

 

[North323]

outside 0.0.0.0 0.0.0.0 192.168.5.1 1 other static

outside 192.168.5.0 255.255.255.0 192.168.5.254 1 connect static

dont these routes overlap? try using the 1st one only. also, posting your config would be helpful...im sure you acls somewhere

 

[Mober]

Here the config, I can't remove the second route since it is a directly connected route. The only ACL I have is for LPD and ICMP traffic coming in.


JointstatePIX# show config
: Saved
: Written by enable_15 at 10:58:02.962 UTC Fri Mar 13 2009
PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password St6ZeLGN0i6GTK/u encrypted
passwd St6ZeLGN0i6GTK/u encrypted
hostname JointstatePIX
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list ACL-INBOUND permit tcp any host 192.168.5.11 eq lpd
access-list ACL-INBOUND permit icmp any any
pager lines 24
logging on
mtu outside 1500
mtu inside 1500
ip address outside 192.168.5.254 255.255.255.0
ip address inside 10.1.1.1 255.255.0.0
ip audit info action alarm
ip audit attack action alarm
no failover
failover timeout 0:00:00
failover poll 15
no failover ip address outside
no failover ip address inside
pdm history enable
arp timeout 14400
global (outside) 1 192.168.5.100-192.168.5.248
global (outside) 1 192.168.5.249
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 192.168.5.11 10.1.3.101 netmask 255.255.255.255 0 0
static (inside,outside) 192.168.5.50 10.1.10.1 netmask 255.255.255.255 0 0
static (inside,outside) 192.168.5.51 10.1.10.2 netmask 255.255.255.255 0 0
static (inside,outside) 192.168.5.12 10.1.4.1 netmask 255.255.255.255 0 0
static (inside,outside) 192.168.5.13 10.1.4.2 netmask 255.255.255.255 0 0
access-group ACL-INBOUND in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.5.1 1
timeout xlate 9:00:00
timeout conn 9:00:00 half-closed 9:00:00 udp 9:00:00 rpc 9:00:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:00:00 sip_media 0:30:00
timeout uauth 8:50:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
no floodguard enable
telnet 10.0.0.0 255.0.0.0 inside
telnet 10.1.2.1 255.255.255.255 inside
telnet 10.1.2.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:922d93299062e256a4e4e1bdae954f80

 

[North323]

this is the only traffic allowed out the 'outside' interface
access-list ACL-INBOUND permit tcp any host 192.168.5.11 eq lpd
access-list ACL-INBOUND permit icmp any any

my guess is acl issue