PIX 506E -

[AIXUser53]

Hi guys,

I am trying to setup a PIX 506E, I have to setup a static IP address for my outside interface, which i have done already. what is the command to setup DNS servers. I want to use the DNS servers IP addresses that my ISP has provided me with.

Thanks in advance.

 

[ChrisAC]

You configure the DNS servers on the internal hosts. You don't need them on the firewall.

Chris.


**********************
Chris A.C, CCNA, CCSA
**********************

 

[themut]

You can configure the PIX as a DHCP server, so it assigns IP address, DNS server, WINS server, etc to your LAN clients. The link below is an excellent guideline:

http://www.cisco.com/en/US/products..._guide_chapter09186a0080172794.html#wp1031612