I am tryting to configure my PIX inside of my cable router. I have had NAT turned off on the router and the inside TCP port is set to 192.168.1.1 My internal Network is on a seperate subnet that uses 192.168.2.0. What I have now is Router to a windows Server with internet sharing. Win2k Server has outside nic card set to 192.168.1.2 Internal Nic card is set to 192.168.2.2 and all workstations on this subnet. My thoughts are I can have my Pix configured to use the 192.168.2.1 inside and outside 192.168.1.2 in place of win2k's outside Nic. and then just "drop it in place" Could you please look over my config and see if I have this set right? Also my exchange server is inside on the 2.2 sn. with smtp port forwarding through the external nic of the win2k server 192.168.1.2.
hostname pixfirewall
domain-name cisco.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
access-list accesslist permit tcp any host 192.168.1.2 eq smtp
access-list accesslist permit tcp any host 192.168.1.2 eq 1723
access-list accesslist permit gre any host 192.168.1.2
access-list accesslist permit icmp any any
access-list accesslist permit udp any host 192.168.1.2 eq 25
access-list accesslist permit udp any host 192.168.1.2 eq 110
pager lines 24
logging console debugging
interface ethernet0 10baset
interface ethernet1 10baset
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.2 255.255.255.0
ip address inside 192.168.2.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 192.168.1.2 192.168.2.2 netmask 255.255.255.255 0 0
access-group accesslist in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
route inside 192.168.2.0 255.255.255.0 192.168.2.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet 192.168.2.0 255.255.255.0 inside
telnet 192.168.1.2 255.255.255.255 inside
telnet timeout 5
ssh 200.9.49.66 255.255.255.255 outside
ssh 192.168.1.0 255.255.255.0 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 20
terminal width 80
Thanks for any help...
Joe
hostname pixfirewall
domain-name cisco.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
access-list accesslist permit tcp any host 192.168.1.2 eq smtp
access-list accesslist permit tcp any host 192.168.1.2 eq 1723
access-list accesslist permit gre any host 192.168.1.2
access-list accesslist permit icmp any any
access-list accesslist permit udp any host 192.168.1.2 eq 25
access-list accesslist permit udp any host 192.168.1.2 eq 110
pager lines 24
logging console debugging
interface ethernet0 10baset
interface ethernet1 10baset
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.2 255.255.255.0
ip address inside 192.168.2.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 192.168.1.2 192.168.2.2 netmask 255.255.255.255 0 0
access-group accesslist in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
route inside 192.168.2.0 255.255.255.0 192.168.2.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet 192.168.2.0 255.255.255.0 inside
telnet 192.168.1.2 255.255.255.255 inside
telnet timeout 5
ssh 200.9.49.66 255.255.255.255 outside
ssh 192.168.1.0 255.255.255.0 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 20
terminal width 80
Thanks for any help...
Joe