PIX 501 to PIX501 VPN with one pix using DHCP on outside

[Guest_imported]

Hello people,

I have a dilemma which I beleive is solved by 6.2 vpnclient command on the PIX. I have two pixes currently both running 6.1(3) . I need them to tunnel, but I can't specify a crypto map peer on one since the other PIX is attahced to a cable modem which assigns the pix outside interface IP via DHCP. Sooo, if anyone has played with this, or can shed some light on the subject, please do!

-Soloyoga

 

[Guest_imported]

Ok, fixed it. I ended up using 6.1(3) on the office PIX and the remote pix I upgraded to 6.2 and used dhcp on the outside and used the vpnclient command to setup a group 2 style negotiation and an open peering arrangement. I could not get it to work without upgrading to 6.2 on thedhcp assigned PIX since only in 6.2 did cisco implement the easyvpn client feature.

-Soloyoga