Hi,
I have configured a Pix 501 to protect a DNS server using the following config. The only function which is carried out by the server is DNS, so as much as possible I want to lock the server down, both outgoing and inbound so that only that function is allowed.
Any comments on this config?
----------------------------------------------------------
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 5gL encrypted
passwd 15f encrypted
hostname myname
domain-name mydomain.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list alist permit tcp any host 207.1.1.7 eq 7390
access-list alist permit udp any host 207.1.1.7 eq domain
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 207.1.1.5 255.255.255.248
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 207.1.1.7 domain 192.168.1.4 domain netmask 255.255.255.255 0 0
static (inside,outside) udp 207.1.1.7 domain 192.168.1.4 domain netmask 255.255.255.255 0 0
static (inside,outside) tcp 207.1.1.9 domain 192.168.1.6 domain netmask 255.255.255.255 0 0
static (inside,outside) udp 207.1.1.9 domain 192.168.1.6 domain netmask 255.255.255.255 0 0
static (inside,outside) 207.1.1.7 192.168.1.4 netmask 255.255.255.255 0 0
static (inside,outside) 207.1.1.9 192.168.1.6 netmask 255.255.255.255 0 0
access-group alist in interface outside
route outside 0.0.0.0 0.0.0.0 205.244.149.110 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
Cryptochecksum:eee1111ggggggdd
: end
[OK]
----------------------------------------------------------
I have configured a Pix 501 to protect a DNS server using the following config. The only function which is carried out by the server is DNS, so as much as possible I want to lock the server down, both outgoing and inbound so that only that function is allowed.
Any comments on this config?
----------------------------------------------------------
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 5gL encrypted
passwd 15f encrypted
hostname myname
domain-name mydomain.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list alist permit tcp any host 207.1.1.7 eq 7390
access-list alist permit udp any host 207.1.1.7 eq domain
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 207.1.1.5 255.255.255.248
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 207.1.1.7 domain 192.168.1.4 domain netmask 255.255.255.255 0 0
static (inside,outside) udp 207.1.1.7 domain 192.168.1.4 domain netmask 255.255.255.255 0 0
static (inside,outside) tcp 207.1.1.9 domain 192.168.1.6 domain netmask 255.255.255.255 0 0
static (inside,outside) udp 207.1.1.9 domain 192.168.1.6 domain netmask 255.255.255.255 0 0
static (inside,outside) 207.1.1.7 192.168.1.4 netmask 255.255.255.255 0 0
static (inside,outside) 207.1.1.9 192.168.1.6 netmask 255.255.255.255 0 0
access-group alist in interface outside
route outside 0.0.0.0 0.0.0.0 205.244.149.110 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
Cryptochecksum:eee1111ggggggdd
: end
[OK]
----------------------------------------------------------