pix 501 no client internet access

[weinmatt]

I was changing the config to allow remote desktop to the server and somehow disabled the internet access for the client workstations. Below is my configuration. Thanks for the help.

Result of firewall command: "sh run"

: Saved
:
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
domain-name whayjones
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 192.168.1.250 Server
object-group service ntp udp
description ntp
port-object range ntp ntp
pager lines 24
icmp permit any outside
mtu outside 1500
mtu inside 1500
ip address outside 66.173.xxx.xxx 255.255.255.248
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location Server 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 66.173.xxx.xxx Server netmask 255.255.255.255 0 0
conduit permit tcp host 66.173.xxx.xxx eq smtp any
conduit permit tcp host 66.173.xxx.xxx eq 3389 any
conduit permit udp any range ntp ntp any
outbound 1 permit 0.0.0.0 0.0.0.0 80 tcp
outbound 1 permit 0.0.0.0 0.0.0.0 443 tcp
apply (inside) 1 outgoing_src
route outside 0.0.0.0 0.0.0.0 66.173.xxx.xxx 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.9-192.168.1.39 inside
dhcpd dns Server 64.83.0.10
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
username brock password p4YNSG3Pp5aFNlyE encrypted privilege 15
terminal width 80
Cryptochecksum:9b88c3ad4ac64743f3c2e2469e0e8096
: end

 

[weinmatt]

I just got it fixed.

Thanks.