Pix 501 Easy VPN Client mode and remote access

[NigelPrice]

Hi,

I have a PIX 501 that is to be used as an Easy VPN Client.
I also need to be able to remotely access the LAN behind this PIX.

My problem is that when the Easy VPN mode is enabled, the PDM and CLI indicate that Easy VPN mode is incompatible with the, nat (inside) 0 acl, statement that I need to allow remote VPN access in.

I have also tried using the sysopt ipsec pl-compatible statements with no success.

Does anyone know of a way in which a 501 can run as an Easy VPN Client, but still allow IPsec/PPTP connections to be made to it?

Thanks in advance.

 

[karmic]

You might want to post your config here, just take out any outside addresses and/or passwords...

~ K.I.S.S - Don't make it any more complex than it has to be ~