pix 501 config transfer through VPN

[MMIMadness]

Is it possible to use tftp to transfer the config of a remote Pix 501 through a VPN tunnel to the main office for backup purposes, i can telnet onto it but have problems sending the config back to the main server.

any sugestions,

Thanks in advance,

Adam

 

[stevensavage]

Have you got port 69 open for tftp to transfer? this will need to be open on both ends - other than that, as long as you can access the tftp server by ip address from the source pix, you should have no problems. What specific problems do you encounter when you try this?

Steve

 

[themut]

Is the outside interface part of your interesting traffic?