I am a newbie with Cisco PIX. Thanks in advance for the help.
I have a PIX 501. I have been tasked with setting up a lab that should have access to our internal network and the internet.
Internet network 192.168.1.x
Lab network 192.168.3.x
192.168.1.27 --- internal network side of PIX
192.168.3.1 --- lab side of PIX
I have configured the PIX so that I can access the internal network and Inet from the lab.
My problem is that I need to be able to access the lab from my workstation and ping ability into the lab from any system. I have tried the suggestions in the manual but no luck.
I have reset the PIX to a basic config see below:
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
hostname lab
domain-name xxxxx.com
clock timezone EST -5
clock summer-time EDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.27 255.255.255.0
ip address inside 192.168.3.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 outside
http 192.168.3.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.3.40-192.168.3.129 inside
dhcpd dns 192.168.1.3
dhcpd wins 192.168.1.3
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd domain xxxxxx.com
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
I have a PIX 501. I have been tasked with setting up a lab that should have access to our internal network and the internet.
Internet network 192.168.1.x
Lab network 192.168.3.x
192.168.1.27 --- internal network side of PIX
192.168.3.1 --- lab side of PIX
I have configured the PIX so that I can access the internal network and Inet from the lab.
My problem is that I need to be able to access the lab from my workstation and ping ability into the lab from any system. I have tried the suggestions in the manual but no luck.
I have reset the PIX to a basic config see below:
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
hostname lab
domain-name xxxxx.com
clock timezone EST -5
clock summer-time EDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.27 255.255.255.0
ip address inside 192.168.3.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 outside
http 192.168.3.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.3.40-192.168.3.129 inside
dhcpd dns 192.168.1.3
dhcpd wins 192.168.1.3
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd domain xxxxxx.com
dhcpd auto_config outside
dhcpd enable inside
terminal width 80