Pix 501 6.1.2 to Intel NetStructure IPSec VPN

[KajLehtinen]

Hi!

I have a Pix 501 that we are trying to connect to a Intel NetStructure VPN gateway. I think it successes in connecting at IKE level, but failes when it comes to IPSEC.

Any ideas where to look for the error?

ISAKMP (0): processing HASH payload. message ID = 0
ISAKMP (0): SA has been authenticated

ISAKMP (0): beginning Quick Mode exchange, M-ID of -1436572155:aa5fa605
IPSEC(key_engine): got a queue event...
IPSEC(spi_response): getting spi 0xe634682d(3862194221) for SA
from xxx.xxx.xx.xxx to xxx.xx.xxx.x for prot 3

return status is IKMP_NO_ERROR
ISAKMP (0): sending INITIAL_CONTACT notify
ISAKMP (0): sending NOTIFY message 24578 protocol 1
ISAKMP (0): sending INITIAL_CONTACT notify
crypto_isakmp_process_block: src xxx.xxx.xx.xxx, dest xxx.xx.xxx.x
ISAKMP (0): processing NOTIFY payload 14 protocol 3
spi 3862194221, message ID = 1573725007
ISAKMP (0): deleting spi 761804006 message ID = 2858395141
return status is IKMP_NO_ERR_NO_TRANS
crypto_isakmp_process_block: src xxx.xxx.xx.xxx, dest xxx.xx.xxx.x
ISAKMP (0): processing DELETE payload. message ID = 878984017
ISAKMP (0): deleting SA: src xxx.xx.xxx.x, dst xxx.xxx.xx.xxx
return status is IKMP_NO_ERR_NO_TRANS
ISADB: reaper checking SA 0x80ad1d28, conn_id = 0 DELETE IT!

Best regards,

Kaj Lehtinen