pirint system info 2

[calarndt]

I new to merlin magix. We have a donated system. I am trying to re-configure it for our use.

Some things don't jive with the manual.

Manual states to use the System Programming menu PRINT option.
Yet the is no print option on that menu... I know there must have been one since i have a PRINT.TXT that I got awhile back when I first started this endeavor!

I've attached a link to a screenshot of this systems Sys Programming menu.

Can somebody enlighten me as to where I'm going wrong...

Is it possible to reset this magix to factory default condition?

Any help greatly appreciated.
TIA
Calvin...

 

[merlinman]

Note the Right Hand Arrow at the top left of the screen.

It denotes that there is another screen you can access.

Simply press the "MORE" button and you will see Page 2.


This holds true for anytime you see that Right Hand Arrow.

If it's there, there's more, if not, what you see is what you get.

When you do "PRINT" some data, it is saved to a FILE on your PC/Laptop. Give the report a unique name, i.e. "ALL" for a PRINT ALL. Otherwise, it will attempt to use the file name of "Print" each and every time you print something.

http://home.comcast.net/~merlinman

 

[calarndt]

Very good merlinman! Thanks...
Don't know how I missed that...