Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
pinouts for 25pr amphenol cable? 1
- Thread starter ty0004
- Start date
-
1
- #2
daronwilson
Vendor
Sure!
The plug is numbered from 1-25 on one side, then starting opposite the 1 pin it is numbered 26-50. The pairs start with the tip (white/blue) on pin 26, and ring (blue/white) on pin 1, just opposite pin 26. They continue all the way up the plug that way with standard 25 pair color codes. If you aren't sure about that code, check it out here:
If you have a pigtail, the hood generally slides off pretty easy and you can see how they land inside. The plug should have numbers 1, 25, 26 and 50 stamped by those pins so you can see the layout.
Hope that helps! It is only my opinion, based on my experience and education...I am always willing to learn, educate me!
Daron J. Wilson, RCDD
daron.wilson@lhmorris.com
The plug is numbered from 1-25 on one side, then starting opposite the 1 pin it is numbered 26-50. The pairs start with the tip (white/blue) on pin 26, and ring (blue/white) on pin 1, just opposite pin 26. They continue all the way up the plug that way with standard 25 pair color codes. If you aren't sure about that code, check it out here:
If you have a pigtail, the hood generally slides off pretty easy and you can see how they land inside. The plug should have numbers 1, 25, 26 and 50 stamped by those pins so you can see the layout.
Hope that helps! It is only my opinion, based on my experience and education...I am always willing to learn, educate me!
Daron J. Wilson, RCDD
daron.wilson@lhmorris.com
- Status