I used the pinout to a previous thread and I still cannot get to the fcli prompt. I am actually using the rj11 4 pin not the rj12 6 pin. Here's what I have for the pinout
db9 rj12 rj11
1
2 1
3 2 -> 1
4 3 -> 2
5 -> 4 -> 3
6 5 4
7 6
8
I hope this isn't confusing. Okay so I have db9 #5pin which goes to rj12 #4pin which will go to rj11 #3 pin. db9 #3 to rj12 #3 goes rj11 #2 and db9 #2 to rj12 #2 goes rj11 #1. Basically which is transmit and receive because i am recieving but doesn't look like i am transmitting. The previous thread works but it seems i only have recieve only. Does someone have any info?
db9 rj12 rj11
1
2 1
3 2 -> 1
4 3 -> 2
5 -> 4 -> 3
6 5 4
7 6
8
I hope this isn't confusing. Okay so I have db9 #5pin which goes to rj12 #4pin which will go to rj11 #3 pin. db9 #3 to rj12 #3 goes rj11 #2 and db9 #2 to rj12 #2 goes rj11 #1. Basically which is transmit and receive because i am recieving but doesn't look like i am transmitting. The previous thread works but it seems i only have recieve only. Does someone have any info?
