Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

pinging

Status
Not open for further replies.

jbonn

MIS
Jan 12, 2001
6
0
0
US
I can surf the internet, but I cannot ping out to any sites. My ISP cannot ping the address of my Lucent Pipeline ISDN router. I do not have a firewall, nor am I using NAT. Does anyone know why I cannot ping anything?

jbonn
 
Try a traceroute to a site and see where it stops. I suspect whatever router you are tied to on the internet may be configured to block ICMP packets which would stop your ping.


Generally, if you can traceroute to it, you should be able to ping it.. most of the time.

Just a thought :)

Mike S
 
you will need to add a static route or turn on nat . Last resort, go ahead and default the router and start over . ( ^d, d for diag and type fclear 3 times and the type nvram clear). when back up and programed type ^d, d and type fsave to exit type quit .
Good Luck !!! #-)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top