I have what I think is a weird problem. Just got on board with this company 2 months ago and I'm trying to implement a Websense server. Well, long story short. When I ping the Websense server, I get one reply or don't get any replies even thought it's on the same network as the PIX's inside interface. Pinging the other way, Websense to inside interface is fine. I don't understand but I'm new to PIX. This happens if I ping any PC including my own. Take a look:
sh route
outside 0.0.0.0 0.0.0.0 xxx.xxx.108.1 1 OTHER static
outside xxx.xxx.108.0 255.255.255.0 xxx.xxx.108.3 1 CONNECT static
failover 127.0.0.1 255.255.255.255 127.0.0.1 1 CONNECT static
inside 223.100.1.0 255.255.255.0 223.100.1.33 1 CONNECT static
223.100.1.241 response received -- 0ms
223.100.1.241 NO response received -- 900ms
223.100.1.241 NO response received -- 860ms
I'm sure this is why I'm getting an "url server not responding". And yes I know they should not be using those addresses in the inside
Thanks for any help
sh route
outside 0.0.0.0 0.0.0.0 xxx.xxx.108.1 1 OTHER static
outside xxx.xxx.108.0 255.255.255.0 xxx.xxx.108.3 1 CONNECT static
failover 127.0.0.1 255.255.255.255 127.0.0.1 1 CONNECT static
inside 223.100.1.0 255.255.255.0 223.100.1.33 1 CONNECT static
223.100.1.241 response received -- 0ms
223.100.1.241 NO response received -- 900ms
223.100.1.241 NO response received -- 860ms
I'm sure this is why I'm getting an "url server not responding". And yes I know they should not be using those addresses in the inside
Thanks for any help