Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pickup Groups

Status
Not open for further replies.

cslt35si

IS-IT--Management
May 10, 2011
22
US
I need to have my director and secretary phone in the same pickup group. I know how to do this in the CS1K, however in the BCM400 i am having problems, frankly i do not know where to start. Can you kindly assist me with this please.
 
under the ext go to capabilites and preferences

under the pickup group assign them the same pickup group i.e. 1,2, etc..
 
Assuming that your BCM knowledge is limited, unlike your CS1K, You might want to refer to this link and guide below.


As it's only a pickup group change, you might want to consider doing the change via the telephone "Telset" access.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top