Physical drive removed

[six3077]

Been getting this information log for the last week on a Compaq Proliant DL580:
Physical Drive removed: SCSI Port3, ID8 of Array Controller in slot 4

wondering what the possible cause of this might be. the drive seems to be functioning fine, no failure lights. The drive certainly wasn't removed physically. Could this be a drive that is ready to fail?

Event ID # 24580

Source is CPQCISSE

I couldn't find much information.
Thanks to anyone with some helpful ideas.

 

[terry712]

what does insight say

assume as you say event you are reading a ms event log
look in the cpqiml - this is something like start programs compaq tools compaq managenent log

also point a browser at

http://server:2301

login and have a look at array

 

[Lou0686]

Hi,

If Insight doesn't show you anything, try searching for the for the MS Event on

http://www.eventid.net.

You will need to provide the Event ID and source of the event.

I have found many resolutions on this site and it's much much easier to search than Microsoft's site.

They may refer you to a Microsoft Tech note. In this case you will have to go to Microsoft's site to review it. The link they provide to the tech note is a pay service.

Lou

 

[Shady66]

Check out the Compaq array configuration utility to see the status....sometimes the indicater lights will not work

Lead, Follow of get the %&*#%$ out of the way !!