Photo printed at the bottom

[cypressm]

Hi,

I've got a problem with this file :

http://cypressm.free.fr/tra.pcl

The image is printed at the bottom of the page, although i've set Ec&a28H Ec&a28V

So it would normally print the image at the top.
If I don't set any position sequence, it is the same problem : it always print at the bottom.

Why does it not work ?

Thanks !

 

[jlasman]

Your link doesn't work, so this is only a guess.

Most likely there are absolute positioning codes within the photo file that are processed after the codes you supply.

Jim Asman
jlasman@telus.net

 

[cypressm]

Sorry it is :

http://cypressm.free.fr/images/tra.pcl

 

[jlasman]

As I suggested, 50 or 60 bytes into the file you will find a raster offset command. It is embedded with some other commands, but if you delete the 5 characters...

5133y

it should then behave.

Jim Asman
jlasman@telus.net