Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phone set report?

Status
Not open for further replies.

captnamo

Technical User
Feb 2, 2006
226
US
Hi! CS1000E. 6.0. Networked sites which still have their Option 11 and Option 61 shelves now have survivable media gateways.

Each site has its own TN ranges. Is there a report I can run that would give totals for digital/analog sets programmed in each location separately?
 
Login into each sytem and go to LD 22 and type SLT at the REQ prompt, wait for the info to spit out.

On the newer software, you'll see a line labeled as Traditional Telephones, this is your digital and analog phones. Older systems software will list the digital and analog separately.
Example: TRADITIONAL TELEPHONES 1506 LEFT 1403 USED 103

Once you have your license info from LD 22, you can go to LD 81 and do a count.
REQ CNT
CUST 0
DATE
PAGE
DES
FEAT sets
FEAT press enter key and wait for the info

Now you have the license and the total of each type of phones.
 
For each individual site? No. Since these are SMG's they are just extended loops off of the main system. It is really one system now.with a copy of the database dispersed to each SMG site.
 
Exactly. Some report by loop would be helpful if such existed. May just have to try manipulating the TNB?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top