Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phone Rings 5 times then Busy SIP Avaya Rogers

Status
Not open for further replies.

mike ferrara

Technical User
May 23, 2018
2
0
1
CA
Hello All

Recently moving Bell PRI and 1FL to Rogers SIP Line that come into our Avaya SBC, then to our Avaya SM and then to the CS1K which has the set on Analog Card, Some of the existing Bell PRI still ring to the sets and continue to ring if the call is not answered.

We have a few (about 150) of the SIP lines that will Ring 5 times and then you hear a busy signal. Weird thing is some of the SIP phones Ring and you don't hear a busy signal, it will continue to ring at the set level, I compared the sets, but not seeing what i'm missing. We don't have voicemail setup on these sets.

DES SUN
TN 068 1 09 15 VIRTUAL
TYPE 500
CDEN 4D
CUST 0
MRT
ERL 00106
WRLS NO
DN 6613 40 MARP
CPND
NAME TELECOMM TEST
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 0
LNRS 16
XLST 106
SCI 0
SCPW
CLS CTD DTN FBD XFA WTA THFD FND HTD ONS
LPR XRA AGRD CWD SWD MWD RMMD LPA XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR PRED MCDD T87D SBMD PKCH MPTD ELCD
PLEV 02
PUID
UPWD
AACS NO
MLWU_LANG 0
FTR RDL 16
DATE 26 NOV 2019
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top