Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phone registration via processor ethernet

Status
Not open for further replies.

ruspola

Technical User
Jan 26, 2004
37
GB

I have encountered an issue where phones once registered to the processor ethernet do not provide dial tone when the receiver is picked up the first time. On checking the ip logs in CM it indicates the phones timeout when they do not receive packets back to them from the processor ehternet on port 1720. However when the line is cleared and reengaged there is dial tone the second time. I am not sure why every time when the phones are rebooted I am encountering this problem and never having an issue on the 2nd call set up.

If there was blockage on port 1720 I would expect the phones never to set up a call. Has anyone else encountered this issue before?. Logs are shown below

IPEVT IPT_UNREG board=PROCR ip=xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy;49304 net_reg= 40 reason=2033
IPEVT IPT_REG board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy;49305 net_reg= 40 reason=normal
IPEVT IPT_TCP_UP board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy; 1720 net_reg= 40 reason=switch_request
IPEVT IPT_TCP_DOWN board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy; 1720 net_reg= 40 reason=00000
IPEVT IPT_REG board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy;49300 net_reg= 40 reason=recovery
IPEVT IPT_TCP_UP board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy; 1720 net_reg= 40 reason=switch_request
IPEVT IPT_TCP_DOWN board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy; 1720 net_reg= 40 reason=endpoint_request
IPEVT IPT_TCP_DOWN board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy; 1720 net_reg= 40 reason=00000
IPEVT IPT_REG board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy;49300 net_reg= 40 reason=recovery
IPEVT IPT_TCP_FAIL_CM board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy; 1720 net_reg= 40 reason=timeout
IPEVT IPT_UNREG board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy;49300 net_reg= 40 reason=2012
IPEVT IPT_REG board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy;49301 net_reg= 40 reason=normal
IPEVT IPT_TCP_UP board=PROCR ip= xx.xx.xx.xx net_reg= 1 ext= 77002 ip= yy.yy.yy.yy; 1720 net_reg= 40 reason=switch_request




 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top