Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

phone manager

Status
Not open for further replies.

monacom

Programmer
Apr 17, 2002
33
GB
I want to use ann existing extension to use phone manager. I have a 2030 phone and would like to use this along side the software. Please help or explain how to administer
 
Phone manager will run alongside any ext on the IPO system

1)The PC running Phone manager must be able to "see" the IPO (use ping to test if nec)

2)Install Phone Manager App & Run

3)Select Configure/PBX for the menu

4)enter the necessary details as follows:-
UserName = the Extn. name OR number
Password = The Extn. password if set
PBX Address = The Ip Address of the IPO.

This should connect Phone Manager to the phone.


TIP - This aplication does not have to be local to the IPO and can be used remotley to aid Fault diagnosis
 
cheers pal. I think I was just being thick. As soon as I sent it I realised I had set up the station with a voip enabled. OOOOPs never mind
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top