Phone Manager Lite V9 1

[DaveAvaya123]

I have a new site that is trying to use phone manager lite on V9 which I know is not supported but it works on our IP office i have working in the office. The system is on the latest version 9 software and phone manager installs and can see the system but fails to connect when you click user list. It can browse and find the system ok. I have run the firewall.bat file and opened all ports.

The customer has a LAN network for all the PC's/servers which is 192.168.1.xxx range and then I have separate switches connected to the WAN port on 192.168.43.xxx The LAN port is set to 192.168.1.61 and the WAN port is 192.168.43.1 I have done this as the customers network was not good enough to Vlan everything off and its something were implementing later this year. I have an IP route to allow the LAN port to talk to anything on the same range. Is there something I need to do to make the LAN port talk to the WAN range?

Any help would be highly appreciated.

 

[intrigrant]

Did you adjust thesecurity settings, by default TFTP read and write is disabled in R9, turn it on and try again.

 

[DaveAvaya123]

Brilliant. I have tested and that's why it works on mine and not the customers. Any reason why they have turned this off?

 

[amriddle01]

Hacking