Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phaser Duplex Unit

Status
Not open for further replies.
jearichmond

jearichmond

Technical User
Apr 27, 2005
4
US
Phaser 7300DN. The duplex assembly unit began to jam. upon inspection there seems to be a tiny lever with an even tinier spring located in the center of the left side. This little assembly (lever and spring) had become dislocated. I have tried to figure out the corect position of the lever and spring, but not sure if it is correct. i have not been able to find any diagram that would illustrate the correct position. Any suggestions would be helpful.

thanks
 
Status
Not open for further replies.

Similar threads

FrLu
  • Locked
  • Question
4050 duplex
Replies
0
Views
102
FrLu
FrLu
SYNTHEA
  • Locked
  • Question
Phaser 6250 won't print BLACK. (refer to closed thread 723-1262185)
Replies
0
Views
61
SYNTHEA
SYNTHEA
Borvik
  • Locked
  • Question
Auto-Duplex and print terms on back
Replies
0
Views
59
Borvik
Borvik
colorprinters
  • Locked
  • Question
XEROX PHASER 7100 BLURRY PRINT
Replies
1
Views
78
jackestean
jackestean
frimu
  • Locked
  • Question
Phaser 8400 - Black arrows are not matching exactly
Replies
1
Views
87
frimu
frimu

Part and Inventory Search

Sponsor

Back
Top