Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 860 noise and error code 08.004.47
- Thread starter iourik25
- Start date
Wow, this is a new one on me. The service manual lists
8,003.46 and then goes to 8,009.65 but from the looks of things, the 8,xxx.xx errors are associated with the CWP (Cap, Wipe Purge) assy. I would check to make sure it's level, by using the marks on the sides of the printer, and then return it to it's down position, and then powering on the printer.
Timothy N. Couch
A1 Printech
Anchorage, AK
8,003.46 and then goes to 8,009.65 but from the looks of things, the 8,xxx.xx errors are associated with the CWP (Cap, Wipe Purge) assy. I would check to make sure it's level, by using the marks on the sides of the printer, and then return it to it's down position, and then powering on the printer.
Timothy N. Couch
A1 Printech
Anchorage, AK
- Status