Hello all,
I have a used Phaser 850 here that currently is sitting on the shelf with some parts dismantled in it and am wishing to get rid of it just to make room.
Prior to decommissioning the Phaser 850 it WAS working, but did have some small issues which I believe a tech could fix.
1.) One of the printhead jets was appearantly clogged towards the right hand side of the page leaving a light gray streak up a page.
2.) The Drum Heater assembly needs replaced as the contacts for where the Halogen bulbs make connection to the assembly finally broke off from the heat and use. This can be solved by a Drum Heater Assembly replacement.
3.) The maint kit rails broke (blue plastic rails) in the process of removing the drum heater assembly and they seemed awful fragile at the time. Makes me wonder if the heat from the halogen bulbs made the plastic more fragile??
4.) The printer also needs a new Maint. Kit as well. The one I had in there was used for another Phaser 850 so only the waste tray and maint drawer/tray is available.
I'm looking to give this printer away. If you live within the region to my zip code 26851 and would like to meet, I would GLADLY do that. If you live somewhere across the country, I'll gladly ship this to you at your expense. UPS Shipping would be around $40 maybe? I'm just guessing on that.
First come first serve...
Bradley
I have a used Phaser 850 here that currently is sitting on the shelf with some parts dismantled in it and am wishing to get rid of it just to make room.
Prior to decommissioning the Phaser 850 it WAS working, but did have some small issues which I believe a tech could fix.
1.) One of the printhead jets was appearantly clogged towards the right hand side of the page leaving a light gray streak up a page.
2.) The Drum Heater assembly needs replaced as the contacts for where the Halogen bulbs make connection to the assembly finally broke off from the heat and use. This can be solved by a Drum Heater Assembly replacement.
3.) The maint kit rails broke (blue plastic rails) in the process of removing the drum heater assembly and they seemed awful fragile at the time. Makes me wonder if the heat from the halogen bulbs made the plastic more fragile??
4.) The printer also needs a new Maint. Kit as well. The one I had in there was used for another Phaser 850 so only the waste tray and maint drawer/tray is available.
I'm looking to give this printer away. If you live within the region to my zip code 26851 and would like to meet, I would GLADLY do that. If you live somewhere across the country, I'll gladly ship this to you at your expense. UPS Shipping would be around $40 maybe? I'm just guessing on that.
First come first serve...
Bradley