Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phaser 850 Part

Status
Not open for further replies.
Brian27

Brian27

Technical User
Sep 14, 2005
3
CA
I am trying to find the cam that moves the rapid release guide. I cannot find it in the parts manual. Is it part of an ass'y?
Thanks in advance.
 
Sort by date Sort by votes
If I remember right that part is on the Drum/transfix assembly. 650-4140-03
 
Upvote 0 Downvote
You will not find that part listed as stated above that is part of the drum/transfix assy. In early models,340-360 the stripper finger assy, which was replaced by the rapid release guide, was an orderable part and that cam came with the assy.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

SYNTHEA
  • Locked
  • Question
Phaser 6250 won't print BLACK. (refer to closed thread 723-1262185)
Replies
0
Views
63
SYNTHEA
SYNTHEA
colorprinters
  • Locked
  • Question
XEROX PHASER 7100 BLURRY PRINT
Replies
1
Views
78
jackestean
jackestean
frimu
  • Locked
  • Question
Phaser 8400 - Black arrows are not matching exactly
Replies
1
Views
87
frimu
frimu
JessicaGalbreth
  • Locked
  • Question
Xerox Phaser 7750 Error 20 IDE
Replies
0
Views
64
JessicaGalbreth
JessicaGalbreth
Lup10
  • Locked
  • Question
Logging into the Tetronix Phaser 850
Replies
0
Views
45
Lup10
Lup10

Part and Inventory Search

Sponsor

Back
Top