LINCOPC
Vendor
- Oct 17, 2002
- 1
Hi
We have a Phaser 850 that at times makes pops/snap sound and does not print. And some time in the day it will start again ok.
I believe their is a bind in the cleaning assys not going to home but have not been able to find it.( I have never been in front of the machine when it happens.)
The Customer used non Xerox Inks which melted in the Loader 1.5 blocks back from the heaters. I've Stripped and cleaned the machine. I found the Right Service station raid Cracked on the rear end around the station latch. and the Pink seal on the capping assy loose in spots.
THIS PROBLEM IS VERRY ERATIC.
Any Ideas.? and what can we use to adhere the Seal on the capping station.
We have a Phaser 850 that at times makes pops/snap sound and does not print. And some time in the day it will start again ok.
I believe their is a bind in the cleaning assys not going to home but have not been able to find it.( I have never been in front of the machine when it happens.)
The Customer used non Xerox Inks which melted in the Loader 1.5 blocks back from the heaters. I've Stripped and cleaned the machine. I found the Right Service station raid Cracked on the rear end around the station latch. and the Pink seal on the capping assy loose in spots.
THIS PROBLEM IS VERRY ERATIC.
Any Ideas.? and what can we use to adhere the Seal on the capping station.