Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 850 Error: 08.001.44.34765
- Thread starter surayake
- Start date
This error means CAP FAULT HOME SENSOR.
Check the right io board for dust or loos connections.
Also check the cap clutch upper right side. It can be jammed. Same error occurs when the Cap Wipe Purge unit is blocked. Check for obstructions. Check the belt thad moves the CWP on the right side of the printer.
Dany
Check the right io board for dust or loos connections.
Also check the cap clutch upper right side. It can be jammed. Same error occurs when the Cap Wipe Purge unit is blocked. Check for obstructions. Check the belt thad moves the CWP on the right side of the printer.
Dany
- Status
Similar threads
- Locked
- Question
