dlstoehner
Technical User
I have a Phaser 8400 with the Error code 13,323.43. I cannot find it anywhere. Can anyone help me?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 8400
- Thread starter dlstoehner
- Start date
- Status
Michael52x
Technical User
Yes! They are! Your error is for the printhead reservoir thermistor is open. Run the Reservoir Temperature Test. If fail replace printhead.
With unit plugged in and running: Press OK and Cancel buttons at once. Displays the Service Tools menu. Press both UP Arrow and Down Arrow to display Hidden service menu. Go to Check Menu and run the heaters test.
"Impatience will reward you with dissatisfaction" RMS Cosmics'97
With unit plugged in and running: Press OK and Cancel buttons at once. Displays the Service Tools menu. Press both UP Arrow and Down Arrow to display Hidden service menu. Go to Check Menu and run the heaters test.
"Impatience will reward you with dissatisfaction" RMS Cosmics'97
- Thread starter
- #3
dlstoehner
Technical User
Thank you for that information. Did I mention that the place I work has several of these 8400's that are down? I have another one that is showing an error 00,020.68. Can you help me with this error as well?
- Status
Similar threads
- Locked
- Question
- Locked
- Question