After several months of problem free operation, I recieved the error code, 37,008.44:2169 The only help provide by Xerox was a sheet that said to shut the printer off and send it in, or take it somewhere. Both methods will cost around 300 dollars and i am not eager to try them. I was wondering if anyone knew what the fault code referred to, and if there was anything that I could do to fix it that doesnt involve a service call. Any tips or information would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 8400 Fault Code 37,008.44:2169
- Thread starter bobmagoo
- Start date
See if you can remove the waste tray. If not, there is ink build up that may restrict movement of the printhead. The other possibility is the cam shaft behind the maintenance roller has cracked pawls. This throws the maintenance roller out of position.
- Status
Similar threads
- Locked
- Question
- Locked
- Question