Funnyfarm69
Vendor
Any ideas on Error code 37,008.44:13412 on Phaser 8400 Guys?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 8400 Error 37,008.44:13412 1
- Thread starter Funnyfarm69
- Start date
- Status
-
1
- #2
According to the manual: Preheat Heater Disconnect The Preheat heater is not drawing the expected power from the supply.
1 Run the Preheat test
2Check the preheater wiring
3 If the test fails, replace the preheater
It sounds as if your preheater has failed.
1 Run the Preheat test
2Check the preheater wiring
3 If the test fails, replace the preheater
It sounds as if your preheater has failed.
- Status
Similar threads
- Locked
- Question
