Phaser 840 22,705,07 and 22,722,06 errors

[pbradley67]

The first page will print but the second page will stop with a media error. I have both of the side covers off the printer. I have noticed when the printer gets a media jam. The white cam on the left side from looking from the front does not rotate back to it to where it should be and be held by the solenoid. Also, it is only printing half a page. I do not have service manual for the printer.

 

[gearman555]

I had they same problem with my 840.There is a clutch on the right side thats gets dirty and or defective.The clutch looks like a relay. Check to see if it sticks.You can disassemble it to clean or just replace it