Phaser 8200 Error 05.202.42

[dude4444]

Printer was on standby for around 48 hours after which red light started blinking and error 05.202.42 was displayed.
It seems to boot up ok although I haven't left in on again without knowing what the problem was or whether it will crop up again. Does anyone know hwat this error code means?
Thanks.

 

[Michael52x]

You probably have a 5,002.42 error, it is a Y-axis encoder problem. The y-axis belts, or motor have failed, and/or the encoder is bad. There is a blockage of the drum movement. Go to diags in service menu, and run the y-axis encoder tests.

 

[dude4444]

Ok thanks very much, will do that.