I have a Phaser 7700 that suddenly started showing a jam when the paper is exiting the machine. Yet there is no jam. The legal sheet is about 3/4 out of the machine and it suddenly stops and says "jam at fuser." When I remove all paper from the paper path, it starts up and does the same thing again.
It normally occurs when printing more than one sheet. The following sheet is about to enter the fuser when the first sheet is about 3/4 out, and that's when the "jam" occurs.
Anybody seen this before and know the answer?
Richdude
It normally occurs when printing more than one sheet. The following sheet is about to enter the fuser when the first sheet is about 3/4 out, and that's when the "jam" occurs.
Anybody seen this before and know the answer?
Richdude