Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 740 error 32
- Thread starter Jfann
- Start date
error 32
Accumulator belt cleaning blade movement error.
If the Error 32 is constant:
1.Replace the imaging unit
2.Replace the accumulator cleaner clutch shaft and the cleaning board
3.Replace the engine control board.
If the Error 32 is intermittent:
1.Replace the accumulator cleaner clutch shaft and the cleaning board
2. Replace the imaging unit.
3. Replace the engine control board.
Accumulator belt cleaning blade movement error.
If the Error 32 is constant:
1.Replace the imaging unit
2.Replace the accumulator cleaner clutch shaft and the cleaning board
3.Replace the engine control board.
If the Error 32 is intermittent:
1.Replace the accumulator cleaner clutch shaft and the cleaning board
2. Replace the imaging unit.
3. Replace the engine control board.
- Status
Similar threads
- Locked
- Question
