Phaser 7300 misregistration

[miahere]

It seems to be in the direction of paper movement. I have done everything Xerox recommends, turn off/on, clean, etc...

The odd thing is after printing about 30 pages it gets better. Still there seems to always be a spot somewhere on the page.

Out of warranty by 2 months. Always use Xerox supplies.

I waste paper, ink and my time "jump starting" this printer everyday.

Please let me know if you have any suggestions.

Thanks!

 

[CULTOFLON]

On a 7300 with an image problem the first place I go is to the transfer belt. The belt on the 7300 causes many problems. I'd replace it before I did any thing else. Later