Have 2 Phaser 6200s. Both of them seem to not detect the toner correctly. Put a brand new Cyan in and it said it was out of toner almost immediately. I've checked the area around the seating and everything looks ok. What other things can I try? It happens with other cartridges too, on both machines.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 6200 Toner Issue
- Thread starter PTech9500
- Start date
The cause can be attributed to toner buildup on the gear teeth of the
Toner Dispense Motor Assembly which is part of the
Toner Cartridge Holder Assembly. Over
time, loose toner mixes with motor lubricant and accumulates on the
gear, eventually causing the motor to bind. This in turn prevents
toner from dispensing from the cartridge
Toner Dispense Motor Assembly which is part of the
Toner Cartridge Holder Assembly. Over
time, loose toner mixes with motor lubricant and accumulates on the
gear, eventually causing the motor to bind. This in turn prevents
toner from dispensing from the cartridge
- Status
Similar threads
- Locked
- Question
- Locked
- Question