Phaser 350 Groans a lot / bending left edge of paper

[bdaino]

Have had this Tek Phaser 350 for years pretty trouble free. Of late, it groans quite load during warmup and sometimes between pages.

Also, on recent job it is jamming a lot, bending the left leading edge of paper - many manke it out, some don't.

Have cleaned all rollers with alc. Whasup?

 

[marty5261]

Sounds like teh Y axis pully is out of alignment or belts are stretched. Loosening the pully and pulling the belts tight and retightening the screws may resolve it or teh pully may need to be replaced.