Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phaser 140 memory upgrade?

Status
Not open for further replies.
anydoor

anydoor

MIS
Mar 15, 2002
1
US
I am about to upgrade the "Printer" memory (as opposed to the Ethernet memory) of my Phaser 140.

There are 3 RAM slots on the removeable card. (Holding the card as it came from the back of the unit) There are two on the left, and one on the right. The two on the left orient SIMMs erect, while the one on the right is a stant mount slot.

I'm assuming that the slots on the left are the Ethernet slots and the one on the right is the Printer memory slot.

Am I correct?

Thanks,

John
 
Status
Not open for further replies.

Similar threads

SYNTHEA
  • Locked
  • Question
Phaser 6250 won't print BLACK. (refer to closed thread 723-1262185)
Replies
0
Views
92
SYNTHEA
SYNTHEA
colorprinters
  • Locked
  • Question
XEROX PHASER 7100 BLURRY PRINT
Replies
1
Views
124
jackestean
jackestean
frimu
  • Locked
  • Question
Phaser 8400 - Black arrows are not matching exactly
Replies
1
Views
140
frimu
frimu
JessicaGalbreth
  • Locked
  • Question
Xerox Phaser 7750 Error 20 IDE
Replies
0
Views
93
JessicaGalbreth
JessicaGalbreth
DaLancer
  • Locked
  • Question
Xerox 8560 Upgrade?
Replies
0
Views
71
DaLancer
DaLancer

Part and Inventory Search

Sponsor

Back
Top