phantom Tn's and super loop

[fruni]

Hi all,
I am using option 11 c and tryin gto configure phantom TN's.
i could not configure 64 super loop as Phantom loop.
I could only configure 96the super loop and phantom loop.

when i configure a Phantom DN what should be my TN ??
please advice. How is it calculated
thanks
manoj

 

[Supportvzla]

The phantom loops (LD 97)64-80 are equivalent to TNs 42-86

supportvzla

 

[cmawbey]

For Option 11 systems using software Release 24 or later, the same principle applies but the Superloops are in a different range. They are Superloops 96-112. This results in a different range of Phantom TNs

Meridian Option 11 Release 24 and later


Superloop (N) TN Range 1 TN Range 2 TN Range 3 TN Range 4
96 TN61-0 to TN61-15 TN62-0 to TN62-15 TN63-0 to TN63-15 TN64-0 to TN64-15
100 TN65-0 to TN65-15 Tn66-0 to TN66-15 TN67-0 to TN67-15 TN68-0 to TN68-15
104 TN69-0 to TN69-15 TN70-0 to TN70-15 TN71-0 to TN71-15 TN73-0 to TN72-15
108 TN73-0 to TN73-15 TN74-0 to TN74-15 TN75-0 to TN75-15 TN76-0 to TN76-15
112 TN77-0 to TN77-15 TN78-0 to TN78-15 TN79-0 to TN79-15 TN80-0 to TN0-15


Colin