Phantom TN and CLID 1

[SherWat]

CS1000 at 7.6
I have a phantom TN (below) with extension 2646. It calls extension 2928 (TN is below). This works.
My issue is when I call from my extension to extension 2646, it sends out the CPND of 2646 and not my name.
So ext 2646 is getting a call from herself.
I have played around with the CLS but can't seem to make this work.
Does anyone have any suggestions?
Thanks very much for any help!

DES PHNTM
TN 096 0 02 07 PHANTOM
TYPE 500
CDEN 4D
CUST 0
MRT
ERL 00000
WRLS NO
DN 2646 0 MARP
CPND
NAME RENEE, TROLLOPE
XPLN 14
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 7000
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
XLST
SCI 0
SCPW
CLS CTD DTN FBD XFD WTA THFD FNA HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD LPD XHD SLKD CCSD LND TVD
CFTD SFA MRD C6D CNID CLBD AUTU
ICDA CDMD LLCN EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR PRED MCDD T87D SBMD PKCH MPTD ELCD
RCO 2
PLEV 02
PUID
UPWD
FCAR NO
AACS NO
MLWU_LANG 0
FTR DCFW 4 2928
DATE 10 MAR 2021

​

Physical phone is x2928 shown below

DES 2071
TN 236 0 01 17 VIRTUAL
TYPE 1220
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
CFG_ZONE 00011
CUR_ZONE 00011
MRT
ERL 0
ECL 0
FDN 7000
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
SCPW
CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA CRPD
MWA LMPN RMMD AAD IMD XHD IRD NID OLD VCE DRG1
POD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNIA CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
VOLA VOUD CDMR PRED RECD MCDD T87D SBMD
KEM4 MSNV FRA PKCH MUTA MWTD DVLD CROD ELCD VMSA
CPND_LANG ENG
RCO 0
HUNT 7000
LHK 0
PLEV 02
PUID
UPWD
FCAR NO
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 2928 0 MARP
CPND
NAME RENEE, TROLLOPE
XPLN 14
DISPLAY_FMT FIRST,LAST
01
02
03
04
05
06
07
​

 

[Firebird Scrambler]

On your extension, have you got CLS = NAMD set as it needs to be NAMA

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.net

linkedin

 

[SherWat]

Yes, I have NAMA set.

 

[StanleySteamer]

Change 2928 DNDA to DNDD.
DNDA will display the name of the dialed DN instead of the calling DN.

 

[Firebird Scrambler]

I've found this today

If extn A calls extn B, extn C answers the call via pickup, extn C's displays shows extn B's name. The customers wants to see extn A's name.
Extn C had CLS DNDA Dialed Name Display Allow, make this extn DNDD and it will show extn A's name (calling extn)

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.net

linkedin

 

[SherWat]

DNDD did the trick! Thanks!