Phantom Superloop Problem

[jdman1964]

I created a Phantom Superloop on Option 61c Rel24 Have the 2 pkg's PHTN254, and FFC139.
When I prt the supl info, I get:
SUPL SUPT SLOT XPEC0 XPEC1
004 STD LEFT 01 0 3 -- - -
020 STD LEFT 02 0 3 -- - -
036 STD LEFT 03 0 3 -- - -
052 STD LEFT 04 0 3 -- - -
096 ---- ---- PHANTOM -- - -
When I try and config a TN, I get:
REQ: NEW
TYPE: 500
TN 96 61 SCH0123
TN 61 0 SCH0120
TN 96 61 SCH0123
I'm at a Loss, I created the superloop from the instructions in thread798-638745.
Any Ideas ? Greatly Appreciated...

 

[30n30w]

Try 96 0 0 0

30n30w

 

[jdman1964]

Thanks very much, that surely worked !! but what is all of this about Rel 24 Phantom associated TN card?
I understood from reading the post that it should be 96 then the shelf 0 then the first card 61 unit's 0- 15?
and one more ? what are the phantom tn's to follow? 96 0 0 1 - 15 ?
Sorry to ask so much but I really appreciate it.. Thanks again..

 

[KCFLHRC]

What you are talking about is phantom loops in an Opt. 11, not a 61. Your tn's would be 96 0 0 15 thru 96 0 15 15 in 16 port increments, units 0-15

 

[jdman1964]

Yes, I see.. Missed that..Thanks for your time.