phantom numbers

[bigbobbyc718]

I have a Merlin Magix release 4.0. How do I program a main number as a phantom number to be bridge onto a 44xx set?

 

[ken1713]

Not sure what you want to do. Is the number a DID or is it a number in the switch that you want to assing to a station? Maybe a t1 or pri?

 

[bigbobbyc718]

It has a PRI t-1 and I want to have x6760 for a personal DID number as the main number for that set and I want to bridge x2277 on this same set which does not have a physical set associated with it.

 

[ken1713]

You can renumber your set to 6760 if you just want a DID to ring at a set. Or you can renumber an adjunct to 6760 and put a cov button on the station to answer that line. Program shared sys access for station 2277. Or you can go into incomming routing on pri and send 6760 to whatever ext. you want it to go to. Hope I'm reading your question right.

 

[bigbobbyc718]

Thanks I'll give it a try