Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

phantom mdn after removing digital extension (bc12)

Status
Not open for further replies.

admiral777

Technical User
Jan 3, 2003
6
0
0
RU
Hi all.
I got a problem. Bc12sp11 had digital extension #1213, that had to be transformed to external no. There was some mdns, presented on 1213. These mdns wasn't removed before ksexe:dir=1213. Usually this procedure goes correctly. But in my case, I guess, one of mdns, 1271, was in speech state during removing of 1213.
Now, after every call to/from 1271 (mdn on 1213 in the past) I'm getting the following result:
allop printout:
CLASS: 1
2 EXECUTION TIMEOUT
DATE TIME ALP NOIF UNIT EQU INF1
14OCT15 11:06:42 1 1 KLP1D 001-0-**-** 0

himdp printout:
DIAGNOSTICS FROM LIM 001, LAST HIREI: 09:50:41 14OCT15

TIME DATE ERROR CODE
11:06:42 14OCT15 H'10
EXECUTION TIMEOUT
LOGICAL PROGRAM ERROR ADDRESS = 02008278
ENTER
SWSW A-LEVEL SIGNAL CHAMULSTA (H'0047)
FROM KLP1M (H'1C9) EXE A IN LIM 001
TO KLP1D (H'1C4) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 12
WITH 0 1 2 3 4 5 6 7 8 9
000 02 3A 03 0F 02 72 08 0F 02 41
010 14 0F
STACK ADDRESS = 0200182A
SIGNAL SEND ADDRESS = 020034C2

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 6A D4 02 00 65 28

TIME DATE ERROR CODE
11:06:41 14OCT15 H'10
EXECUTION TIMEOUT
LOGICAL PROGRAM ERROR ADDRESS = 02008252
ENTER
SWSW A-LEVEL SIGNAL CHAMULSTA (H'0047)
FROM KLP1M (H'1C9) EXE A IN LIM 001
TO KLP1D (H'1C4) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 12
WITH 0 1 2 3 4 5 6 7 8 9
000 02 3A 03 0F 02 72 08 0F 02 41
010 14 0F

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 6A D4 02 00 65 28
NO INFORMATION STORED IN LIM 002, LAST HIREI: 09:50:41 14OCT15

END

attempt to remove 1271 (after the cleaning all it's mdns on all dtses):
KSEXE:DIR=1271;
SURE? (YES/NO)
<y
NOT ACCEPTED
ODN IS
MULTIPLE REPRESENTED

<ksmdp:mdn=1271;
KEY SYSTEM MULTIPLE DIRECTORY NUMBER DATA
MDN DIR KEY CALALT
1271 *1271 11 1
COMMAND LOST


Dear gurus, please, any ideas? Maybe I'm not right, but it seems, data sector of KLP1M contains only pointers, not extension numbers? Where to put sacos to kill phantom mdn?

 
Hi,

Usually, if the MDN is busy, removal of the ODN is not possible (even in BC12). So obviously something else has gone wrong. FYI, there are no extension numbers in KLP1M, just pointers etc. To clear out this problem is quite tricky. I assume you don't have any proper backup (made before this was happening)?
But if you really want this to be solved on this forum, prepare for many traces and printouts. If yes, start with susip on dir 1271. Then trace KHH and KLP1M when trying to remove the extension, and another one when printing ksmdp. LIM=1 is a good start....
Of course, if you have a clean pcregen, you can start from scratch using program units from dusii, if no INL is available for BC12. Remember the license....
Good luck!

fcpli
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top