Phantom Loops

[PhoneFixer]

I need to create a phantom superloop in a Model 11c. In the Software Input/Output Guide in LD 97 it says use Superloop numbers N96-N112 but in the Software Feature Guide it says N64-N80. Also do I need to do anything in LD 17 first?

 

[PhoneFixer]

Never mind...my rememberer was broken.

 

[franksbr]

Did you created your phantom DN ? I need to do that do to route email using phantom DN but I'm confuse!

 

[PhoneFixer]

The DN is just a "regular" DN but doesn't appear on any phone. I have three people that use an office to receive voicemails only. So the receptionist transfers any callers to their individual "extension". If you have a numbering plan, its great to have a block of numbers reserved for phantom TN's to keep things orderly. (Is that possible?) They are configured as 500 sets in LD 10.

 

[brahimMorocoo]

y have to configure a phantom loop

ld 97
req chg
type SUPL

SUPL N64-N80 for option 11c
phantom tn are restricted to card solts 41-60 (which convert to superloop 64-80)


and the yo configure Phantom TN


LD 10

req new
type 500
TN ( card slot ) 41 0 for example
.....

 

[roupe]

LD 97 REQ CHG
TYPE SUPL
SUPL Nxx

OPT11 before rls 24
phan loop Associated Phantom TN (card)

64 41 42 43 44 units 0-15 all

68 45 46 47 48

72 49 50 51 52

76 53 54 55 56

80 57 58 59 60

OPT 11 rls 24 and later added 32 loops and 20 TNs

96 61 62 63 64

100 65 66 67 68

104 69 70 71 72

108 73 74 75 76

112 77 78 79 80