Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phantom Loop
- Thread starter giantman
- Start date
To see if you have any LD 22
REQ prt
TYPE cequ
CEQU
MPED 8D
SUPL 000 004 008 012
016 032 036 040
044 048 064 068
072 P096 The "P" indicates that the loop is a phantom
XCT 000
CONF 029 030 031 062
094 095
DLOP NUM DCH FRM LCMT YALM T1TE TRSH
PRI 01 23 ESF B8S FDL 0 00
12 23 ESF B8S FDL 0 00
MISP
Print
To create a phantom loop go to LD 97
New
SUPL N0 - 156 -- I normally try to go with the highest possible loop
Carrige return on through do an EDD and your done.
Post back with any questions.
REQ prt
TYPE cequ
CEQU
MPED 8D
SUPL 000 004 008 012
016 032 036 040
044 048 064 068
072 P096 The "P" indicates that the loop is a phantom
XCT 000
CONF 029 030 031 062
094 095
DLOP NUM DCH FRM LCMT YALM T1TE TRSH
PRI 01 23 ESF B8S FDL 0 00
12 23 ESF B8S FDL 0 00
MISP
To create a phantom loop go to LD 97
New
SUPL N0 - 156 -- I normally try to go with the highest possible loop
Carrige return on through do an EDD and your done.
Post back with any questions.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
