lowvo
Technical User
- Mar 17, 2006
- 37
I Have an option 61 that I would like to see if any phantom dn's have ever been set up...where do I go to see if any are in the switch?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phantom DN's
- Thread starter lowvo
- Start date
- Status
To see if you have a phantom loop goto LD 22
REQ: PRT
TYPE: CEQU
look for any loop numbers that are preceded with an "N" Below is a print that has a Phantom loop. This is an older print that is before the Succession upgrade. This was just quicker to cut and paste because I had it in an old txt file in this PC.I have since outed the loop from TERD and moved it to the SUPL before I upgraded to succession.
Succession does not like TERD density loops. It still looks the same it's just listed under SUPL now.
CEQU
MPED 8D
TERM
REMO
TERD 054
REMD
TERQ N159
REMQ
SUPL 004 008 020 028 036 044 068
SUPC 088
SUPF
Hope this helps
Ron
REQ: PRT
TYPE: CEQU
look for any loop numbers that are preceded with an "N" Below is a print that has a Phantom loop. This is an older print that is before the Succession upgrade. This was just quicker to cut and paste because I had it in an old txt file in this PC.I have since outed the loop from TERD and moved it to the SUPL before I upgraded to succession.
Succession does not like TERD density loops. It still looks the same it's just listed under SUPL now.
CEQU
MPED 8D
TERM
REMO
TERD 054
REMD
TERQ N159
REMQ
SUPL 004 008 020 028 036 044 068
SUPC 088
SUPF
Hope this helps
Ron
- Status
Similar threads
- Locked
- Question