Personalized Ringing on Bridged Appearance

[jbud]

The title says it all. We have stations with 3 or more bridged appearances on them and would like to change the ring tone to help the users determine which appearance is ringing. Is this possible?

I can't seem to get Personalized Ringing to work on the bridged appearance.

Definity 9.0, 6408D+ terminal.

As always, thanks in advance,

Jeff

 

[Bobg1]

They should be able to tell by looking at their terminal.
I do not believe you can change the ringing pattern for the bridged appearance

 

[Callmaster]

look in the station form on page 2.
there is the step "per button ring control".
change "n" to "y" and you can change the ring on the call-appr and brdg-appr ... With best regards
Callmaster

 

[ctr999]

I am pretty certain a telephone set can have only one ring pattern. You cannot have distinct rings for different bridged appearances on the same telephone. It would be a nice feature to have.

 

[jglittle]

Personalized ringing pattern is for the entire station. The only real control that you have over the individual line is ringer on or ringer off.
Sorry.

LittleJohn,
>>>-------> Hope this helps,
LittleJohn
>>>------>

 

[Multidisadvantaged]

To distinguish between a bridged call appearance ringing and a normal call-appearance ringing you could set the bridged appearance to "abbrieviated ring." This will give just one short ring on a bridged appearance, and normal ringing on the other appearances.

Trying is the first step on the road to failure